3" Fitter, 14" Tall, 3/4 Sandblasted Tall Chimney

3 inch fitter (outer base diameter) by 14 inch height and 3 5/8 inch bulge tall 3/4 sandblasted chimney for #2 burners and 3 inch galleries.

Over the years people have tried different techniques to soften the light coming from table lamps and lanterns by applying a "frosting" to the glass lamp chimney that encloses the source of illumination. Generally speaking, three types of frostings have been used over the years with varying degrees of success. Two inexpensive techniques are acid etching and cold-paint. Both work well in subduing harsh light but both finishes are quite fragile and cannot be cleaned without scratching or discoloring the "frost". If your source of illumination is a kerosene burner, you will find that cleaning the soot from your frosted chimney without damaging the finish is almost impossible.
On the other hand, sandblasting is a vastly superior method compared to acid etching or cold-paint. A sandblasted finish will not scratch and may be cleaned vigorously without marring the surface of the glass.
If handled carefully, our sandblasted borosilicate glass chimneys should last indefinitely even on a kereosene lamp.

Warning:

PLEASE NOTE:

All glass (shades, chimneys, hurricanes) will vary in thickness due to the manufacturing process.  We guarantee the glass will fit the holder/burner specified in their description. Any attempted use parting from a proper fitter or burner is at your own risk and is not covered by our returns policy.

How To:

Choosing the Correct Size for Kerosene Lamp Chimney Replacement

Legal Note:

California Residents: Click here for Proposition 65 Warning.